DALSA CR-GEN0-M6400R3 Camera Module – Fast Integration, Stable Transmission, New Engine for Industrial Automation!

Description

The Teledyne DALSA CR-GEN0-M6400R3 is an ultra-high-resolution monochrome line scan camera from Teledyne DALSA’s acclaimed Genie Nano series, engineered for precision imaging in demanding industrial inspection applications. Featuring a cutting-edge 8k (8192-pixel) linear CMOS sensor with 5μm pixel size, this camera delivers exceptional sensitivity and dynamic range (70 dB) for capturing fine details in high-speed production environments. The CR-GEN0-M6400R3 leverages Camera Link® Full interface technology, supporting data transfer rates up to 850 MB/s at its maximum line rate of 67 kHz, making it ideal for continuous web inspection of materials like metals, films, and printed electronics.

Designed for seamless integration into machine vision systems, this Teledyne DALSA camera incorporates advanced features such as programmable region-of-interest (ROI), on-the-fly flat-field correction, and multi-line averaging for noise reduction. Its rugged IP67-rated housing withstands industrial contaminants, while the integrated thermal management system ensures stable performance across -5°C to +55°C operating temperatures. The CR-GEN0-M6400R3 provides unmatched versatility for optical character verification, surface defect detection, and dimensional analysis in 24/7 manufacturing operations.

DALSA CR-GEN0-M6400R3

Technical Specifications

Main Features and Advantages

Precision imaging performance: The CR-GEN0-M6400R3 achieves <0.5% linearity error with its 8k sensor, capturing sub-micron defects in materials like photovoltaic wafers or precision foil. Its NIR-enhanced quantum efficiency (65% at 850nm) enables inspection through semi-opaque materials.

Adaptive acquisition controls: On-camera flat-field correction compensates for lens vignetting in real-time, while programmable ROI allows partial-scanning for faster throughput. The camera’s multi-line HDR mode combines short/long exposures in a single scan for high-contrast imaging of reflective surfaces.

Industrial robustness: Sealed housing resists dust, oils, and high-pressure washdowns. Vibration-resistant mechanical design (tested to 10g RMS) ensures stability in printing/packaging machinery. Teledyne’s Sapera™ LT SDK provides ready-to-use tools for defect classification and measurement.

Application Field

The Teledyne DALSA CR-GEN0-M6400R3 excels in high-speed quality control across continuous manufacturing processes. In printing, it detects color registration errors and ink splatter on web presses at speeds exceeding 15 m/s. For flat-panel display production, it identifies pixel defects and mura imperfections on OLED panels.

Steel mills utilize its high dynamic range to inspect hot rolled coils for surface cracks and scaling. In nonwovens manufacturing, the camera detects fiber inconsistencies and holes in fabrics under UV illumination. Solar cell producers rely on its NIR sensitivity for crack detection in silicon wafers during laser scribing.

Related Products

CR-GEN0-M3200R3: 4k resolution version for mid-speed applications

LA-GM-08-F: F-mount lens optimized for 8k line scan

Xcelera-CL PX8: Camera Link® frame grabber for CR-GEN0-M6400R3

LTB-8K-HR: High-resolution line light for 8k inspection

CR-GEN3-C2450: Area scan alternative for complex geometries

Sapera™ Processing+: AI-based defect analysis software

DALSA CR-GEN0-M6400R3

Installation and Maintenance

Pre-installation preparation: Verify Camera Link® frame grabber compatibility (e.g., PoCL support) and use shielded cabling (max 10m). Align sensor plane perpendicular to motion direction with <0.1° tolerance. Calibrate using Sapera™ CamExpert software before deployment.

Maintenance recommendations: Clean lens interface quarterly with optical-grade wipes. Monitor operating temperature via camera registers. Update firmware through Sapera™ Configuration Suite annually. Avoid direct compressed air cleaning to prevent static damage.