Description

The GE Fanuc IC698CPE020-CC is a specialized, conformal coated version of the standard IC698CPE020 AC power supply module for the PACSystems RX7i platform. This module performs the essential function of converting incoming AC line power to the stable, regulated +5VDC power required by all components within the RX7i chassis, including the CPU, I/O modules, and communication interfaces. The defining characteristic of the GE Fanuc IC698CPE020-CC is the application of a protective conformal coating over its printed circuit board. This coating is a thin polymeric film applied to safeguard the module’s sensitive electronics from harsh environmental conditions that would otherwise cause premature failure.

The primary value of the IC698CPE020-CC lies in its enhanced robustness, making it suitable for applications where the control system is exposed to elevated levels of moisture, humidity, condensation, dust, salt spray, or industrial contaminants. In such environments, a standard non-coated module like the IC698CPE020 could suffer from current leakage, short circuits, and corrosion due to the accumulation of conductive deposits or moisture. The conformal coating on the GE Fanuc IC698CPE020-CC acts as a barrier, effectively insulating the circuitry from these damaging effects. This specialized protection ensures the reliability and longevity of the entire control system by securing its most fundamental component—the power supply—in demanding operating conditions where system uptime is critical.

IC698CPE020-CC GE

Technical Specifications

Parameter Name	Parameter Value
Product Model	IC698CPE020-CC
Manufacturer	GE Fanuc (now part of Emerson’s GE Intelligent Platforms legacy)
Product Type	Conformal Coated AC Power Supply Module
Input Voltage Range	85 – 264 VAC, 47 – 63 Hz
Output Power	30 Watts
Output Voltage	+5 VDC
Hold-up Time	20 ms minimum
Overload Protection	Current limiting, automatic recovery
Status Indicators	Power Good (Green LED)
Backplane Current	Provides up to 6A at +5VDC
Operating Temperature	0°C to 60°C (32°F to 140°F)
Protective Coating	Conformal Coating (typically acrylic, urethane, or silicone-based)
Special Feature	Enhanced protection against moisture, fungus, dust, and contaminants
Safety Certifications	UL, cUL, CE marked

Main Features and Advantages

The standout feature of the GE Fanuc IC698CPE020-CC is its conformal coating, which provides a significant advantage in harsh environments. This coating offers robust protection against moisture and humidity, preventing the formation of current-leaking paths (dendritic growth) between closely spaced circuit traces. This is crucial in applications where condensation is a risk, such as in facilities with wide temperature swings or high humidity levels. Additionally, the coating provides resistance to a wide range of industrial contaminants, including dust, dirt, and chemical vapors, which can be corrosive over time. This makes the IC698CPE020-CC ideal for plants in the chemical, pulp and paper, or mining industries.

Beyond its protective coating, the IC698CPE020-CC retains all the reliable features of the standard model. It boasts a wide input voltage range, allowing for seamless operation across different global power standards without manual configuration. The integrated current-limiting overload protection safeguards both the power supply and the backplane from damage due to fault conditions, with automatic recovery to minimize downtime. The “Power Good” LED offers immediate visual status confirmation. By choosing the GE Fanuc IC698CPE020-CC, users gain not only a reliable power source but also an added layer of defense that enhances the mean time between failures (MTBF) for the entire RX7i system, reducing long-term maintenance costs and unplanned outages in challenging applications.

Application Field

The GE Fanuc IC698CPE020-CC is specifically designed for industrial environments where control cabinets are exposed to conditions beyond the scope of a typical air-conditioned control room. In water and wastewater treatment plants, where high humidity, condensation, and corrosive atmospheres are prevalent, the IC698CPE020-CC ensures reliable power for controllers managing filtration, chemical dosing, and pump stations, preventing failures that could lead to environmental incidents.

In the mining and minerals processing industry, where equipment is subject to extreme levels of dust, moisture, and mechanical vibration, the protective qualities of the GE Fanuc IC698CPE020-CC are essential. It is used to power control systems for crushers, conveyors, and processing mills. Similarly, in marine and offshore installations, or in coastal industrial facilities, the module’s resistance to salt spray corrosion makes it a mandatory choice. The IC698CPE020-CC is also well-suited for food and beverage production areas, where control panels may be exposed to frequent wash-downs with high-pressure water and cleaning chemicals, ensuring compliance with hygiene standards without sacrificing electronic component life.

IC698CPE020-CC GE

Related Products

IC698CPE020: The standard version of this 30-watt power supply without conformal coating, suitable for clean, controlled environments.

IC698CPE010-CC: A 50-watt conformal coated power supply module for larger RX7i chassis that require both higher power and environmental protection.

IC698PSA100: A 100-watt AC power supply for high-demand systems, available with or without specialized coatings.

IC698CHS101: A 10-slot RX7i chassis, often paired with the IC698CPE020-CC for a complete protected system backbone.

IC698CMX016: The RX7i CPU module, whose reliability in harsh environments is dependent on a stable power source like the IC698CPE020-CC.

IC698ACC720: A VME bus adapter module that can be used in the same protected chassis as the IC698CPE020-CC to interface with legacy I/O.