Description

The NI SBRIO-9607 (National Instruments Single-Board RIO) is an integrated embedded control and acquisition platform combining a real-time processor, user-reconfigurable FPGA, and industrial I/O in a rugged standalone design. Built around the Xilinx Zynq-7020 SoC (ARM Cortex-A9 dual-core + Artix-7 FPGA), this device delivers deterministic processing for custom timing/control applications. The SBRIO-9607 features 256 MB DRAM, 512 MB storage, and comprehensive interfaces including Gigabit Ethernet, USB 2.0, RS232, and 68-pin digital I/O. Its -40°C to 85°C operating range and passive cooling support deployment in harsh environments like mobile test systems or factory automation.

Engineered for rapid prototyping to final deployment, the NI SBRIO-9607 executes LabVIEW Real-Time OS for deterministic control while leveraging the FPGA for high-speed signal processing (up to 40 MHz clock rates). Native integration with NI’s RIO architecture allows direct access to analog/digital I/O lines from the FPGA fabric, enabling custom protocols, hardware-in-the-loop (HIL) simulation, and ultra-low-latency control. The device’s DIN-rail mountable enclosure and industrial certifications (IP40, CE) make it ideal for distributed monitoring systems requiring compact size and reliability beyond commercial computing solutions.

NI SBRIO-9607

Technical Specifications

Parameter Name	Parameter Value
Product Model	SBRIO-9607
Manufacturer	National Instruments (NI)
Product Type	Embedded Controller with FPGA
Processor	Xilinx Zynq-7020 (667 MHz Dual-Core ARM Cortex-A9)
FPGA	Xilinx Artix-7 (28K logic cells, 80 DSP slices)
DRAM	256 MB DDR3
Storage	512 MB Flash
Digital I/O	68 lines (5V/TTL, 8× bidirectional banks)
Analog Input	16-bit, ±10V (8 ch @ 500 kS/s)
Analog Output	16-bit, ±10V (4 ch @ 100 kS/s)
Communication	Gigabit Ethernet, USB 2.0, RS232, CAN
Operating Temp	-40°C to 85°C
Power Input	9–35 VDC (2.5 mm screw terminal)
Certifications	CE, UKCA, IP40

Main Features and Advantages

FPGA-Driven Customization: The NI SBRIO-9607‘s Artix-7 FPGA enables hardware-level I/O manipulation for sub-microsecond response tasks like PWM generation, encoder interfacing, or custom communication protocols (e.g., J1939 CAN). LabVIEW FPGA Module allows graphical programming without VHDL/Verilog expertise.

Deterministic Real-Time Control: Dual-core ARM processor runs NI Linux Real-Time OS for hard deadline execution, synchronized to IEEE 1588 Precision Time Protocol via Ethernet. Ideal for closed-loop control at 1 kHz–10 kHz rates.

Integrated I/O Flexibility: Combines 16-bit analog acquisition (500 kS/s), high-current digital lines (24 mA sink/source), and 4× counter/timers. All I/O directly accessible from FPGA for parallel processing, bypassing OS latency.

Rugged Deployability: Fanless design eliminates moving parts, while conformal coating protects against humidity and contaminants. Withstands 5g vibration and 50g shock per IEC 60068-2 standards.

Seamless Toolchain Integration: Programmable via LabVIEW or C/C++ with NI-RIO drivers. Supports third-party tools like MATLAB/Simulink for model-based design.

NI SBRIO-9607

Application Field

The NI SBRIO-9607 excels in embedded systems demanding compact size and high customization:

Robotics: Motor control (BLDC/stepper) with FPGA-based commutation and EtherCAT master/slave implementation

Energy Monitoring: Power quality analysis using simultaneous voltage/current sampling at 500 kS/s

Test Automation: HIL testers for automotive ECUs with CAN/LIN bus simulation

Structural Health Monitoring: Vibration analysis with IEPE sensor excitation and real-time FFT

Smart Agriculture: Environmental control systems integrating moisture sensors, valve control, and LoRaWAN connectivity

Defense: Ruggedized data loggers for mobile platforms with MIL-STD-202 shock compliance

Related Products

NI cRIO-904x: CompactRIO systems with modular I/O expansion

NI myRIO-1900: Academic-focused embedded device

NI 9205: 32-ch ±10V analog input module (compatible with cRIO)

NI 9264: 16-bit analog output module

NI 9401: 8-channel bidirectional digital I/O module

NI 9853: HS CAN interface

NI PXIe-8880: High-performance controller for PXI systems

NI Single-Board RIO GPIO Accessory Kit: Breakout boards for SBRIO-9607

Installation and Maintenance

Pre-installation preparation: Verify power supply compatibility (9–35 VDC, min. 15W). Use ESD-safe handling procedures when connecting I/O. Install NI-RIO drivers and LabVIEW FPGA Module on host PC. Configure network settings via NI MAX before deployment.

Maintenance recommendations: Update firmware quarterly using NI Update Service. Monitor operating temperature via onboard sensors (keep <80°C). Clean ventilation slots annually in dusty environments. Backup configuration files to nonvolatile storage monthly. Avoid blocking heatsink fins; maintain 50 mm clearance.